obtained gcc-4.6.4.tar.bz2 from upstream website;upstream

verified gcc-4.6.4.tar.bz2.sig;
imported gcc-4.6.4 source tree from verified upstream tarball.

downloading a git-generated archive based on the 'upstream' tag
should provide you with a source tree that is binary identical
to the one extracted from the above tarball.

if you have obtained the source via the command 'git clone',
however, do note that line-endings of files in your working
directory might differ from line-endings of the respective
files in the upstream repository.

1 files changed, 357 insertions, 0 deletions

diff --git a/gcc/config/i386/i386-interix.h b/gcc/config/i386/i386-interix.h
new file mode 100644
index 000000000..a2f579a1c
--- /dev/null
+++ b/gcc/config/i386/i386-interix.h
@@ -0,0 +1,357 @@
+/* Target definitions for GCC for Intel 80386 running Interix
+   Parts Copyright (C) 1991, 1999, 2000, 2002, 2003, 2004, 2007, 2008, 2009,
+   2010 Free Software Foundation, Inc.
+
+   Parts:
+     by Douglas B. Rupp (drupp@cs.washington.edu).
+     by Ron Guilmette (rfg@netcom.com).
+     by Donn Terry (donn@softway.com).
+     by Mumit Khan (khan@xraylith.wisc.edu).
+
+This file is part of GCC.
+
+GCC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 3, or (at your option)
+any later version.
+
+GCC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GCC; see the file COPYING3.  If not see
+<http://www.gnu.org/licenses/>.  */
+
+/* The rest must follow.  */
+
+#define DBX_DEBUGGING_INFO 1
+#define SDB_DEBUGGING_INFO 1
+#define PREFERRED_DEBUGGING_TYPE DBX_DEBUG
+
+/* By default, target has a 80387, uses IEEE compatible arithmetic,
+   and returns float values in the 387 and needs stack probes
+   We also align doubles to 64-bits for MSVC default compatibility
+   We do bitfields MSVC-compatibly by default, too.  */
+#undef TARGET_SUBTARGET_DEFAULT
+#define TARGET_SUBTARGET_DEFAULT \
+   (MASK_80387 | MASK_IEEE_FP | MASK_FLOAT_RETURNS | MASK_STACK_PROBE | \
+    MASK_ALIGN_DOUBLE | MASK_MS_BITFIELD_LAYOUT)
+
+#undef TARGET_CPU_DEFAULT
+#define TARGET_CPU_DEFAULT TARGET_CPU_DEFAULT_i486
+
+#define WCHAR_TYPE_SIZE 16
+#define WCHAR_TYPE "short unsigned int"
+
+/* WinNT (and thus Interix) use unsigned int */
+#define SIZE_TYPE "unsigned int"
+
+#define ASM_LOAD_ADDR(loc, reg)   "     leal " #loc "," #reg "\n"
+
+#define TARGET_DECLSPEC 1
+
+/* cpp handles __STDC__ */
+#define TARGET_OS_CPP_BUILTINS()					\
+  do									\
+    {									\
+	builtin_define ("__INTERIX");					\
+	builtin_define ("__OPENNT");					\
+	builtin_define ("_M_IX86=300");					\
+	builtin_define ("_X86_=1");					\
+	builtin_define ("__stdcall=__attribute__((__stdcall__))");	\
+	builtin_define ("__cdecl=__attribute__((__cdecl__))");		\
+	builtin_assert ("system=unix");					\
+	builtin_assert ("system=interix");				\
+	if (preprocessing_asm_p ())					\
+	  builtin_define_std ("LANGUAGE_ASSEMBLY");			\
+	else								\
+	  {								\
+	     builtin_define_std ("LANGUAGE_C");				\
+	     if (c_dialect_cxx ())					\
+	       builtin_define_std ("LANGUAGE_C_PLUS_PLUS");		\
+	     if (c_dialect_objc ())					\
+	       builtin_define_std ("LANGUAGE_OBJECTIVE_C");		\
+	  } 								\
+    }									\
+  while (0)
+
+#undef CPP_SPEC
+/* Write out the correct language type definition for the header files.  
+   Unless we have assembler language, write out the symbols for C.
+   mieee is an Alpha specific variant.  Cross pollination a bad idea.
+   */
+#define CPP_SPEC "-remap %{posix:-D_POSIX_SOURCE} \
+-isystem %$INTERIX_ROOT/usr/include"
+
+#define TARGET_VERSION fprintf (stderr, " (i386 Interix)");
+
+/* The global __fltused is necessary to cause the printf/scanf routines
+   for outputting/inputting floating point numbers to be loaded.  Since this
+   is kind of hard to detect, we just do it all the time.  */
+#undef X86_FILE_START_FLTUSED
+#define X86_FILE_START_FLTUSED 1
+
+/* A table of bytes codes used by the ASM_OUTPUT_ASCII and
+   ASM_OUTPUT_LIMITED_STRING macros.  Each byte in the table
+   corresponds to a particular byte value [0..255].  For any
+   given byte value, if the value in the corresponding table
+   position is zero, the given character can be output directly.
+   If the table value is 1, the byte must be output as a \ooo
+   octal escape.  If the tables value is anything else, then the
+   byte value should be output as a \ followed by the value
+   in the table.  Note that we can use standard UN*X escape
+   sequences for many control characters, but we don't use
+   \a to represent BEL because some svr4 assemblers (e.g. on
+   the i386) don't know about that.  Also, we don't use \v
+   since some versions of gas, such as 2.2 did not accept it.  */
+
+#define ESCAPES \
+"\1\1\1\1\1\1\1\1btn\1fr\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\
+\0\0\"\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\
+\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\\\0\0\0\
+\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\1\
+\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\
+\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\
+\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\
+\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1\1"
+
+/* Some svr4 assemblers have a limit on the number of characters which
+   can appear in the operand of a .string directive.  If your assembler
+   has such a limitation, you should define STRING_LIMIT to reflect that
+   limit.  Note that at least some svr4 assemblers have a limit on the
+   actual number of bytes in the double-quoted string, and that they
+   count each character in an escape sequence as one byte.  Thus, an
+   escape sequence like \377 would count as four bytes.
+
+   If your target assembler doesn't support the .string directive, you
+   should define this to zero.
+*/
+
+#define STRING_LIMIT	((unsigned) 256)
+
+#define STRING_ASM_OP	"\t.string\t"
+
+/* The routine used to output NUL terminated strings.  We use a special
+   version of this for most svr4 targets because doing so makes the
+   generated assembly code more compact (and thus faster to assemble)
+   as well as more readable, especially for targets like the i386
+   (where the only alternative is to output character sequences as
+   comma separated lists of numbers).  */
+
+#define ASM_OUTPUT_LIMITED_STRING(FILE, STR)				\
+  do									\
+    {									\
+      const unsigned char *_limited_str =				\
+        (const unsigned char *) (STR);					\
+      unsigned ch;							\
+      fprintf ((FILE), "%s\"", STRING_ASM_OP);				\
+      for (; (ch = *_limited_str); _limited_str++)			\
+        {								\
+	  int escape = ESCAPES[ch];					\
+	  switch (escape)						\
+	    {								\
+	    case 0:							\
+	      putc (ch, (FILE));					\
+	      break;							\
+	    case 1:							\
+	      fprintf ((FILE), "\\%03o", ch);				\
+	      break;							\
+	    default:							\
+	      putc ('\\', (FILE));					\
+	      putc (escape, (FILE));					\
+	      break;							\
+	    }								\
+        }								\
+      fprintf ((FILE), "\"\n");						\
+    }									\
+  while (0)
+
+/* The routine used to output sequences of byte values.  We use a special
+   version of this for most svr4 targets because doing so makes the
+   generated assembly code more compact (and thus faster to assemble)
+   as well as more readable.  Note that if we find subparts of the
+   character sequence which end with NUL (and which are shorter than
+   STRING_LIMIT) we output those using ASM_OUTPUT_LIMITED_STRING.  */
+
+#undef ASM_OUTPUT_ASCII
+#define ASM_OUTPUT_ASCII(FILE, STR, LENGTH)				\
+  do									\
+    {									\
+      const unsigned char *_ascii_bytes =				\
+        (const unsigned char *) (STR);					\
+      const unsigned char *limit = _ascii_bytes + (LENGTH);		\
+      unsigned bytes_in_chunk = 0;					\
+      for (; _ascii_bytes < limit; _ascii_bytes++)			\
+        {								\
+	  const unsigned char *p;					\
+	  if (bytes_in_chunk >= 64)					\
+	    {								\
+	      fputc ('\n', (FILE));					\
+	      bytes_in_chunk = 0;					\
+	    }								\
+	  for (p = _ascii_bytes; p < limit && *p != '\0'; p++)		\
+	    continue;							\
+	  if (p < limit && (p - _ascii_bytes) <= (long) STRING_LIMIT)	\
+	    {								\
+	      if (bytes_in_chunk > 0)					\
+		{							\
+		  fputc ('\n', (FILE));					\
+		  bytes_in_chunk = 0;					\
+		}							\
+	      ASM_OUTPUT_LIMITED_STRING ((FILE), _ascii_bytes);		\
+	      _ascii_bytes = p;						\
+	    }								\
+	  else								\
+	    {								\
+	      if (bytes_in_chunk == 0)					\
+		fputs (ASM_BYTE, (FILE));				\
+	      else							\
+		fputc (',', (FILE));					\
+	      fprintf ((FILE), "0x%02x", *_ascii_bytes);		\
+	      bytes_in_chunk += 5;					\
+	    }								\
+	}								\
+      if (bytes_in_chunk > 0)						\
+        fputc ('\n', (FILE));						\
+    }									\
+  while (0)
+
+/* Emit code to check the stack when allocating more that 4000
+   bytes in one go.  */
+
+#define CHECK_STACK_LIMIT 0x1000
+
+/* the following are OSF linker (not gld) specific... we don't want them */
+#undef HAS_INIT_SECTION
+#undef LD_INIT_SWITCH
+#undef LD_FINI_SWITCH
+
+/* The following are needed for us to be able to use winnt.c, but are not
+   otherwise meaningful to Interix.  (The functions that use these are
+   never called because we don't do DLLs.) */
+#define TARGET_NOP_FUN_DLLIMPORT 1
+#define drectve_section()  /* nothing */
+
+/* Objective-C has its own packing rules...
+   Objc tries to parallel the code in stor-layout.c at runtime	
+   (see libobjc/encoding.c).  This (compile-time) packing info isn't 
+   available at runtime, so it's hopeless to try.
+
+   And if the user tries to set the flag for objc, give an error
+   so he has some clue.  */
+
+#undef  SUBTARGET_OVERRIDE_OPTIONS
+#define SUBTARGET_OVERRIDE_OPTIONS					\
+do {									\
+  if (strcmp (lang_hooks.name, "GNU Objective-C") == 0)			\
+    {									\
+      if ((target_flags & MASK_MS_BITFIELD_LAYOUT) != 0			\
+	  && (target_flags_explicit & MASK_MS_BITFIELD_LAYOUT) != 0)	\
+	{								\
+	   error ("ms-bitfields not supported for objc");		\
+	}								\
+      target_flags &= ~MASK_MS_BITFIELD_LAYOUT;				\
+    }									\
+} while (0)
+
+#define EH_FRAME_IN_DATA_SECTION
+
+#define READONLY_DATA_SECTION_ASM_OP	"\t.section\t.rdata,\"r\""
+
+/* The MS compilers take alignment as a number of bytes, so we do as well */
+#undef ASM_OUTPUT_ALIGN
+#define ASM_OUTPUT_ALIGN(FILE,LOG) \
+  if ((LOG)!=0) fprintf ((FILE), "\t.balign %d\n", 1<<(LOG))
+
+/* The linker will take care of this, and having them causes problems with
+   ld -r (specifically -rU).  */
+#define CTOR_LISTS_DEFINED_EXTERNALLY 1
+
+#define SET_ASM_OP	"\t.set\t"
+/* Output a definition (implements alias) */
+#define ASM_OUTPUT_DEF(FILE,LABEL1,LABEL2)				\
+do									\
+{									\
+    fputs (SET_ASM_OP, (FILE));						\
+    assemble_name (FILE, LABEL1);					\
+    fputc (',', (FILE));						\
+    assemble_name (FILE, LABEL2);					\
+    fputc ('\n', (FILE));						\
+    }									\
+while (0)
+
+#define HOST_PTR_AS_INT unsigned long
+
+/* The following two flags are usually "off" for i386, because some non-gnu
+   tools (for the i386) don't handle them.  However, we don't have that
+   problem, so....  */
+
+/* Forward references to tags are allowed.  */
+#define SDB_ALLOW_FORWARD_REFERENCES
+
+/* Unknown tags are also allowed.  */
+#define SDB_ALLOW_UNKNOWN_REFERENCES
+
+/* The integer half of this list needs to be constant.  However, there's
+   a lot of disagreement about what the floating point adjustments should
+   be.  We pick one that works with gdb.  (The underlying problem is
+   what to do about the segment registers.  Since we have access to them
+   from /proc, we'll allow them to be accessed in gdb, even tho the
+   gcc compiler can't generate them.  (There's some evidence that 
+   MSVC does, but possibly only for certain special "canned" sequences.) */
+
+#undef DBX_REGISTER_NUMBER
+#define DBX_REGISTER_NUMBER(n) \
+(TARGET_64BIT ? dbx64_register_map[n] \
+ : (n) == 0 ? 0 \
+ : (n) == 1 ? 2 \
+ : (n) == 2 ? 1 \
+ : (n) == 3 ? 3 \
+ : (n) == 4 ? 6 \
+ : (n) == 5 ? 7 \
+ : (n) == 6 ? 5 \
+ : (n) == 7 ? 4 \
+ : ((n) >= FIRST_STACK_REG && (n) <= LAST_STACK_REG) ? (n)+8 \
+ : (-1))
+
+/* Define this macro if references to a symbol must be treated
+   differently depending on something about the variable or
+   function named by the symbol (such as what section it is in).  */
+
+#define SUBTARGET_ENCODE_SECTION_INFO i386_pe_encode_section_info
+#undef  TARGET_STRIP_NAME_ENCODING
+#define TARGET_STRIP_NAME_ENCODING  i386_pe_strip_name_encoding_full
+
+#if 0	
+/* Turn this back on when the linker is updated to handle grouped
+   .data$ sections correctly. See corresponding note in i386/interix.c. 
+   MK.  */
+
+/* Interix uses explicit import from shared libraries.  */
+#define MULTIPLE_SYMBOL_SPACES 1
+
+extern void i386_pe_unique_section (tree, int);
+#define TARGET_ASM_UNIQUE_SECTION i386_pe_unique_section
+#define TARGET_ASM_FUNCTION_RODATA_SECTION default_no_function_rodata_section
+
+#define SUPPORTS_ONE_ONLY 1
+#endif /* 0 */
+
+/* Switch into a generic section.  */
+#define TARGET_ASM_NAMED_SECTION  default_pe_asm_named_section
+
+/* DWARF2 Unwinding doesn't work with exception handling yet.  */
+#define DWARF2_UNWIND_INFO 0
+
+/* Don't assume anything about the header files.  */
+#define NO_IMPLICIT_EXTERN_C
+
+/* MSVC returns structs of up to 8 bytes via registers.  */
+
+#define DEFAULT_PCC_STRUCT_RETURN 0
+
+#define SUBTARGET_RETURN_IN_MEMORY(TYPE, FNTYPE) \
+	(TYPE_MODE (TYPE) == BLKmode \
+	 || (AGGREGATE_TYPE_P (TYPE) && int_size_in_bytes (TYPE) > 8 ))