FilterInputStream buffers input from an
* underlying implementation to provide a possibly more efficient read
* mechanism. It maintains the buffer and buffer state in instance
* variables that are available to subclasses. The default buffer size
* of 2048 bytes can be overridden by the creator of the stream.
*
* This class also implements mark/reset functionality. It is capable
* of remembering any number of input bytes, to the limits of
* system memory or the size of Integer.MAX_VALUE
*
* Please note that this class does not properly handle character
* encodings. Consider using the BufferedReader class which
* does.
*
* @author Aaron M. Renn (arenn@urbanophile.com)
* @author Warren Levy (warrenl@cygnus.com)
* @author Jeroen Frijters (jeroen@frijters.net)
*/
public class BufferedInputStream extends FilterInputStream
{
/**
* This is the default buffer size
*/
private static final int DEFAULT_BUFFER_SIZE = 2048;
/**
* The buffer used for storing data from the underlying stream.
*/
protected byte[] buf;
/**
* The number of valid bytes currently in the buffer. It is also the index
* of the buffer position one byte past the end of the valid data.
*/
protected int count;
/**
* The index of the next character that will by read from the buffer.
* When pos == count, the buffer is empty.
*/
protected int pos;
/**
* The value of pos when the mark() method was
* called.
* This is set to -1 if there is no mark set.
*/
protected int markpos = -1;
/**
* This is the maximum number of bytes than can be read after a
* call to mark() before the mark can be discarded.
* After this may bytes are read, the reset() method
* may not be called successfully.
*/
protected int marklimit;
/**
* This is the initial buffer size. When the buffer is grown because
* of marking requirements, it will be grown by bufferSize increments.
* The underlying stream will be read in chunks of bufferSize.
*/
private final int bufferSize;
/**
* This method initializes a new BufferedInputStream that will
* read from the specified subordinate stream with a default buffer size
* of 2048 bytes
*
* @param in The subordinate stream to read from
*/
public BufferedInputStream(InputStream in)
{
this(in, DEFAULT_BUFFER_SIZE);
}
/**
* This method initializes a new BufferedInputStream that will
* read from the specified subordinate stream with a buffer size that
* is specified by the caller.
*
* @param in The subordinate stream to read from
* @param size The buffer size to use
*
* @exception IllegalArgumentException when size is smaller then 1
*/
public BufferedInputStream(InputStream in, int size)
{
super(in);
if (size <= 0)
throw new IllegalArgumentException();
buf = new byte[size];
// initialize pos & count to bufferSize, to prevent refill from
// allocating a new buffer (if the caller starts out by calling mark()).
pos = count = bufferSize = size;
}
/**
* This method returns the number of bytes that can be read from this
* stream before a read can block. A return of 0 indicates that blocking
* might (or might not) occur on the very next read attempt.
*
* The number of available bytes will be the number of read ahead bytes
* stored in the internal buffer plus the number of available bytes in
* the underlying stream.
*
* @return The number of bytes that can be read before blocking could occur
*
* @exception IOException If an error occurs
*/
public synchronized int available() throws IOException
{
return count - pos + in.available();
}
/**
* This method closes the underlying input stream and frees any
* resources associated with it. Sets buf to null.
*
* @exception IOException If an error occurs.
*/
public void close() throws IOException
{
// Free up the array memory.
buf = null;
pos = count = 0;
markpos = -1;
in.close();
}
/**
* This method marks a position in the input to which the stream can be
* "reset" by calling the reset() method. The parameter
* readlimit is the number of bytes that can be read from the
* stream after setting the mark before the mark becomes invalid. For
* example, if mark() is called with a read limit of 10, then
* when 11 bytes of data are read from the stream before the
* reset() method is called, then the mark is invalid and the
* stream object instance is not required to remember the mark.
*
* Note that the number of bytes that can be remembered by this method
* can be greater than the size of the internal read buffer. It is also
* not dependent on the subordinate stream supporting mark/reset
* functionality.
*
* @param readlimit The number of bytes that can be read before the mark
* becomes invalid
*/
public synchronized void mark(int readlimit)
{
marklimit = readlimit;
markpos = pos;
}
/**
* This method returns true to indicate that this class
* supports mark/reset functionality.
*
* @return true to indicate that mark/reset functionality is
* supported
*
*/
public boolean markSupported()
{
return true;
}
/**
* This method reads an unsigned byte from the input stream and returns it
* as an int in the range of 0-255. This method also will return -1 if
* the end of the stream has been reached.
*
* This method will block until the byte can be read.
*
* @return The byte read or -1 if end of stream
*
* @exception IOException If an error occurs
*/
public synchronized int read() throws IOException
{
if (pos >= count && !refill())
return -1; // EOF
return buf[pos++] & 0xFF;
}
/**
* This method reads bytes from a stream and stores them into a caller
* supplied buffer. It starts storing the data at index off
* into the buffer and attempts to read len bytes. This method
* can return before reading the number of bytes requested, but it will try
* to read the requested number of bytes by repeatedly calling the underlying
* stream as long as available() for this stream continues to return a
* non-zero value (or until the requested number of bytes have been read).
* The actual number of bytes read is returned as an int. A -1 is returned
* to indicate the end of the stream.
*
* This method will block until some data can be read.
*
* @param b The array into which the bytes read should be stored
* @param off The offset into the array to start storing bytes
* @param len The requested number of bytes to read
*
* @return The actual number of bytes read, or -1 if end of stream.
*
* @exception IOException If an error occurs.
* @exception IndexOutOfBoundsException when off or
* len are negative, or when off + len
* is larger then the size of b,
*/
public synchronized int read(byte[] b, int off, int len) throws IOException
{
if (off < 0 || len < 0 || b.length - off < len)
throw new IndexOutOfBoundsException();
if (len == 0)
return 0;
if (pos >= count && !refill())
return -1; // No bytes were read before EOF.
int totalBytesRead = Math.min(count - pos, len);
System.arraycopy(buf, pos, b, off, totalBytesRead);
pos += totalBytesRead;
off += totalBytesRead;
len -= totalBytesRead;
while (len > 0 && in.available() > 0 && refill())
{
int remain = Math.min(count - pos, len);
System.arraycopy(buf, pos, b, off, remain);
pos += remain;
off += remain;
len -= remain;
totalBytesRead += remain;
}
return totalBytesRead;
}
/**
* This method resets a stream to the point where the mark()
* method was called. Any bytes that were read after the mark point was
* set will be re-read during subsequent reads.
*
* This method will throw an IOException if the number of bytes read from
* the stream since the call to mark() exceeds the mark limit
* passed when establishing the mark.
*
* @exception IOException If mark() was never called or more
* then marklimit bytes were read since the last
* call to mark()
*/
public synchronized void reset() throws IOException
{
if (markpos == -1)
throw new IOException(buf == null ? "Stream closed." : "Invalid mark.");
pos = markpos;
}
/**
* This method skips the specified number of bytes in the stream. It
* returns the actual number of bytes skipped, which may be less than the
* requested amount.
*
* @param n The requested number of bytes to skip
*
* @return The actual number of bytes skipped.
*
* @exception IOException If an error occurs
*/
public synchronized long skip(long n) throws IOException
{
if (buf == null)
throw new IOException("Stream closed.");
final long origN = n;
while (n > 0L)
{
if (pos >= count)
{
if (markpos == -1)
{
// Buffer is empty and no mark is set, skip on the
// underlying stream.
n -= in.skip(n);
break;
}
else if (!refill())
break;
}
int numread = (int) Math.min((long) (count - pos), n);
pos += numread;
n -= numread;
}
return origN - n;
}
// GCJ LOCAL: package-private for use by InputStreamReader
/**
* Called to refill the buffer (when count is equal to pos).
*
* @return true when at least one additional byte was read
* into buf, false otherwise (at EOF).
*/
boolean refill() throws IOException
{
if (buf == null)
throw new IOException("Stream closed.");
if (markpos == -1 || count - markpos >= marklimit)
{
markpos = -1;
pos = count = 0;
}
else
{
byte[] newbuf = buf;
if (markpos < bufferSize)
{
newbuf = new byte[count - markpos + bufferSize];
}
System.arraycopy(buf, markpos, newbuf, 0, count - markpos);
buf = newbuf;
count -= markpos;
pos -= markpos;
markpos = 0;
}
int numread = in.read(buf, count, bufferSize);
if (numread <= 0) // EOF
return false;
count += numread;
return true;
}
}