ISO C++ documentation style docbook doxygen

Documentation for the GNU C++ Library is created from three independent sources: a manual, a FAQ, and an API reference. The sub-directory doc within the main source directory contains Makefile.am and Makefile.in, which provide rules for generating documentation, described in excruciating detail below. The doc sub-directory also contains three directories: doxygen, which contains scripts and fragments for doxygen, html, which contains an html version of the manual, and xml, which contains an xml version of the manual. Diverging from established documentation conventions in the rest of the GCC project, libstdc++ does not use Texinfo as a markup language. Instead, Docbook is used to create the manual and the FAQ, and Doxygen is used to construct the API reference. Although divergent, this conforms to the GNU Project recommendations as long as the output is of sufficient quality, as per GNU Manuals.

Certain Makefile rules are required by the GNU Coding Standards. These standard rules generate HTML, PDF, XML, or man files. For each of the generative rules, there is an additional install rule that is used to install any generated documentation files into the prescribed installation directory. Files are installed into share/doc or share/man directories. The standard Makefile rules are conditionally supported, based on the results of examining the host environment for prerequisites at configuration time. If requirements are not found, the rule is aliased to a dummy rule that does nothing, and produces no documentation. If the requirements are found, the rule forwards to a private rule that produces the requested documentation. For more details on what prerequisites were found and where, please consult the file config.log in the libstdc++ build directory. Compare this log to what is expected for the relevant Makefile conditionals: BUILD_INFO, BUILD_XML, BUILD_HTML, BUILD_MAN, BUILD_PDF, and BUILD_EPUB. Supported Makefile rules: make html make install-html Generates multi-page HTML documentation, and installs it in the following directories: doc/libstdc++/libstdc++-api.html doc/libstdc++/libstdc++-manual.html make pdf make install-pdf Generates indexed PDF documentation, and installs it as the following files: doc/libstdc++/libstdc++-api.pdf doc/libstdc++/libstdc++-manual.pdf make man make install-man Generates man pages, and installs it in the following directory: man/man3/ The generated man pages are namespace-qualified, so to look at the man page for vector, one would use man std::vector. make epub make install-epub Generates documentation in the ebook/portable electronic reader format called Epub, and installs it as the following file. doc/libstdc++/libstdc++-manual.epub make xml make install-xml Generates single-file XML documentation, and installs it as the following files: doc/libstdc++/libstdc++-api-single.xml doc/libstdc++/libstdc++-manual-single.xml Makefile rules for several other formats are explicitly not supported, and are always aliased to dummy rules. These unsupported formats are: info, ps, and dvi.

Tool Version Required By coreutils 8.5 all bash 4.1 all doxygen 1.7.0 all graphviz 2.26 graphical hierarchies pdflatex 2007-59 pdf output Prerequisite tools are Bash 2.0 or later, Doxygen, and the GNU coreutils. (GNU versions of find, xargs, and possibly sed and grep are used, just because the GNU versions make things very easy.) To generate the pretty pictures and hierarchy graphs, the Graphviz package will need to be installed. For PDF output, pdflatex is required.

The following Makefile rules run Doxygen to generate HTML docs, XML docs, XML docs as a single file, PDF docs, and the man pages. These rules are not conditional! If the required tools are not found, or are the wrong versions, the rule may end in an error. make doc-html-doxygen make doc-xml-doxygen make doc-xml-single-doxygen make doc-pdf-doxygen make doc-man-doxygen Generated files are output into separate sub directories of doc/doxygen/ in the build directory, based on the output format. For instance, the HTML docs will be in doc/doxygen/html. Careful observers will see that the Makefile rules simply call a script from the source tree, run_doxygen, which does the actual work of running Doxygen and then (most importantly) massaging the output files. If for some reason you prefer to not go through the Makefile, you can call this script directly. (Start by passing --help.) If you wish to tweak the Doxygen settings, do so by editing doc/doxygen/user.cfg.in. Notes to fellow library hackers are written in triple-# comments.

In general, libstdc++ files should be formatted according to the rules found in the Coding Standard. Before any doxygen-specific formatting tweaks are made, please try to make sure that the initial formatting is sound. Adding Doxygen markup to a file (informally called doxygenating) is very simple. The Doxygen manual can be found here. We try to use a very-recent version of Doxygen. For classes, use deque/vector/list and std::pair as examples. For functions, see their member functions, and the free functions in stl_algobase.h. Member functions of other container-like types should read similarly to these member functions. Some commentary to accompany the first list in the Special Documentation Blocks section of the Doxygen manual: For longer comments, use the Javadoc style... ...not the Qt style. The intermediate *'s are preferred. Use the triple-slash style only for one-line comments (the brief mode). This is disgusting. Don't do this. Some specific guidelines: Use the @-style of commands, not the !-style. Please be careful about whitespace in your markup comments. Most of the time it doesn't matter; doxygen absorbs most whitespace, and both HTML and *roff are agnostic about whitespace. However, in <pre> blocks and @code/@endcode sections, spacing can have interesting effects. Use either kind of grouping, as appropriate. doxygroups.cc exists for this purpose. See stl_iterator.h for a good example of the other kind of grouping. Please use markup tags like @p and @a when referring to things such as the names of function parameters. Use @e for emphasis when necessary. Use @c to refer to other standard names. (Examples of all these abound in the present code.) Complicated math functions should use the multi-line format. An example from random.h: /** * @brief A model of a linear congruential random number generator. * * @f[ * x_{i+1}\leftarrow(ax_{i} + c) \bmod m * @f] */ One area of note is the markup required for @file markup in header files. Two details are important: for filenames that have the same name in multiple directories, include part of the installed path to disambiguate. For example: /** @file debug/vector * This file is a GNU debug extension to the Standard C++ Library. */ The other relevant detail for header files is the use of a libstdc++-specific doxygen alias that helps distinguish between public header files (like random) from implementation or private header files (like bits/c++config.h.) This alias is spelled @headername and can take one or two arguments that detail the public header file or files that should be included to use the contents of the file. All header files that are not intended for direct inclusion must use headername in the file block. An example: /** @file bits/basic_string.h * This is an internal header file, included by other library headers. * Do not attempt to use it directly. @headername{string} */ Be careful about using certain, special characters when writing Doxygen comments. Single and double quotes, and separators in filenames are two common trouble spots. When in doubt, consult the following table. HTML Doxygen \ \\ " \" ' \' <i> @a word <b> @b word <code> @c word <em> @a word <em> <em>two words or more</em>

Tool Version Required By docbook5-style-xsl 1.76.1 all xsltproc 1.1.26 all xmllint 2.7.7 validation dblatex 0.3 pdf output pdflatex 2007-59 pdf output docbook2X 0.8.8 info output Editing the DocBook sources requires an XML editor. Many exist: some notable options include emacs, Kate, or Conglomerate. Some editors support special XML Validation modes that can validate the file as it is produced. Recommended is the nXML Mode for emacs. Besides an editor, additional DocBook files and XML tools are also required. Access to the DocBook 5.0 stylesheets and schema is required. The stylesheets are usually packaged by vendor, in something like docbook5-style-xsl. To exactly match generated output, please use a version of the stylesheets equivalent to docbook5-style-xsl-1.75.2-3. The installation directory for this package corresponds to the XSL_STYLE_DIR in doc/Makefile.am and defaults to /usr/share/sgml/docbook/xsl-ns-stylesheets. For processing XML, an XML processor and some style sheets are necessary. Defaults are xsltproc provided by libxslt. For validating the XML document, you'll need something like xmllint and access to the relevant DocBook schema. These are provided by a vendor package like libxml2 and docbook5-schemas-5.0-4 For PDF output, something that transforms valid Docbook XML to PDF is required. Possible solutions include dblatex, xmlto, or prince. Of these, dblatex is the default. Other options are listed on the DocBook web pages. Please consult the libstdc++@gcc.gnu.org list when preparing printed manuals for current best practice and suggestions. For Texinfo output, something that transforms valid Docbook XML to Texinfo is required. The default choice is docbook2X.

The following Makefile rules generate (in order): an HTML version of all the DocBook documentation, a PDF version of the same, and a single XML document. These rules are not conditional! If the required tools are not found, or are the wrong versions, the rule may end in an error. make doc-html-docbook make doc-pdf-docbook make doc-xml-single-docbook Generated files are output into separate sub directores of doc/docbook/ in the build directory, based on the output format. For instance, the HTML docs will be in doc/docbook/html. If the Docbook stylesheets are installed in a custom location, one can use the variable XSL_STYLE_DIR to over-ride the Makefile defaults. As so: make XSL_STYLE_DIR="/usr/share/xml/docbook/stylesheet/nwalsh" doc-html-docbook

After editing the xml sources, please make sure that the XML documentation and markup is still valid. This can be done easily, with the following validation rule: make doc-xml-validate-docbook This is equivalent to doing: xmllint --noout --valid xml/index.xml Please note that individual sections and chapters of the manual can be validated by substituting the file desired for xml/index.xml in the command above. Reducing scope in this manner can be helpful when validation on the entire manual fails. All Docbook xml sources should always validate. No excuses!

Which files are important All Docbook files are in the directory libstdc++-v3/doc/xml Inside this directory, the files of importance: spine.xml - index to documentation set manual/spine.xml - index to manual manual/*.xml - individual chapters and sections of the manual faq.xml - index to FAQ api.xml - index to source level / API All *.txml files are template xml files, i.e., otherwise empty files with the correct structure, suitable for filling in with new information. Canonical Writing Style class template function template member function template (via C++ Templates, Vandevoorde) class in namespace std: allocator, not std::allocator header file: iostream, not <iostream> General structure <set> <book> </book> <book> <chapter> </chapter> </book> <book> <part> <chapter> <section> </section> <sect1> </sect1> <sect1> <sect2> </sect2> </sect1> </chapter> <chapter> </chapter> </part> </book> </set>

Complete details on Docbook markup can be found in the DocBook Element Reference, online. An incomplete reference for HTML to Docbook conversion is detailed in the table below. HTML Docbook <p> <para> <pre> <computeroutput>, <programlisting>, <literallayout> <ul> <itemizedlist> <ol> <orderedlist> <il> <listitem> <dl> <variablelist> <dt> <term> <dd> <listitem> <a href=""> <ulink url=""> <code> <literal>, <programlisting> <strong> <emphasis> <em> <emphasis> " <quote> And examples of detailed markup for which there are no real HTML equivalents are listed in the table below. Element Use <structname> <structname>char_traits</structname> <classname> <classname>string</classname> <function> <function>clear()</function> <function>fs.clear()</function> <type> <type>long long</type> <varname> <varname>fs</varname> <literal> <literal>-Weffc++</literal> <literal>rel_ops</literal> <constant> <constant>_GNU_SOURCE</constant> <constant>3.0</constant> <command> <command>g++</command> <errortext> <errortext>In instantiation of</errortext> <filename> <filename class="headerfile">ctype.h</filename> <filename class="directory">/home/gcc/build</filename> <filename class="libraryfile">libstdc++.so</filename>