diff options
-rwxr-xr-x | build.sh | 2 | ||||
-rw-r--r-- | etc/README.md | 20 | ||||
-rw-r--r-- | etc/build.usage | 14 | ||||
-rw-r--r-- | midipix.env | 102 | ||||
-rw-r--r-- | subr.rtl/rtl_complex.subr | 8 | ||||
-rw-r--r-- | subr.rtl/rtl_list.subr | 42 | ||||
-rw-r--r-- | subr.rtl/rtl_state.subr | 26 | ||||
-rw-r--r-- | subr/build_init.subr | 171 | ||||
-rw-r--r-- | subr/ex_pkg_exec.subr | 2 | ||||
-rw-r--r-- | subr/ex_pkg_restart.subr | 286 | ||||
-rw-r--r-- | subr/pkg_build_clean.subr | 33 | ||||
-rw-r--r-- | subr/pkg_configure_clean.subr | 20 | ||||
-rw-r--r-- | subr/pkg_fetch_clean.subr | 21 | ||||
-rw-r--r-- | subr/pkg_install_clean.subr | 12 |
14 files changed, 528 insertions, 231 deletions
@@ -39,7 +39,7 @@ buildp_dispatch_fail_pkg() { rtl_log_msg fatal "${BUILD_WORKDIR}/${_pkg_name}_stderrout.log:"; cat "${BUILD_WORKDIR}/${_pkg_name}_stderrout.log"; if [ -n "${DEFAULT_BUILD_LAST_FAILED_PKG_FNAME}" ]; then - printf "%s" "${_pkg_name}" > "${DEFAULT_BUILD_LAST_FAILED_PKG_FNAME}"; + printf "%s\n" "${_pkg_name}" > "${DEFAULT_BUILD_LAST_FAILED_PKG_FNAME}"; fi; rtl_log_msg fatal "Build failed in \`%s', check \`%s' for details." "${_pkg_name}" "${BUILD_WORKDIR}/${_pkg_name}_stderrout.log"; else rtl_log_msg warning "Build failed in \`%s', check \`%s' for details." "${_pkg_name}" "${BUILD_WORKDIR}/${_pkg_name}_stderrout.log"; diff --git a/etc/README.md b/etc/README.md index 582a5da6..be8c54f6 100644 --- a/etc/README.md +++ b/etc/README.md @@ -248,7 +248,7 @@ Rebuild entire build groups including or excluding group dependencies, respectiv ``` usage: ./build.sh [-a nt32|nt64] [-b debug|release] [-C dir[,..]] [-D kind[,..]] - [-F ipv4|ipv6|offline] [-h] [-p jobs] [-P] [-r ALL|LAST] + [-F ipv4|ipv6|offline] [-h|--help| [-p jobs] [-P] [-r ALL|LAST] [-r [*[*[*]]]name[,..][:[^|<|<=|>|>=]step,..]] [-R] [-v[v[v[v]]]] [--as-needed] [--debug-minipix] [--dump-on-abort] [--reset-state] [--roar] [[=]<group>|<variable name>=<variable override>[ ..]] @@ -265,7 +265,7 @@ usage: ./build.sh [-a nt32|nt64] [-b debug|release] [-C dir[,..]] [-D kind[, Force IPv4 (ipv4) or IPv6 (ipv6) when downloading package archives and/or Git repositories or don't download either at all (offline.) - -h Show this screen. + -h|--help Show short/full help screen, respectively. -p jobs Enables parallelisation at group-level, whenever applicable. -P The maximum count of jobs defaults to the number of logical processors on the host system divided by two (2.) @@ -292,14 +292,14 @@ usage: ./build.sh [-a nt32|nt64] [-b debug|release] [-C dir[,..]] [-D kind[, with, resp. Currently defined build steps are: - fetch_download, fetch_extract, configure_patch_pre, - configure_autotools, configure_patch, configure, build, - install_subdirs, install_make, install_files, install_libs, - install, install_rpm, and clean. - - Additionally, the following shorthand aliases and pseudo-steps are provided: - @fetch, @configure, @build, @install, and @clean, and - start and finish. + fetch_clean, fetch_download, fetch_extract, configure_clean, + configure_patch_pre, configure_autotools, configure_patch, + configure, build_clean, build, install_clean, install_subdirs, + install_make, install_files, install_libs, install, install_rpm, + and clean. + + Additionally, the following virtual steps are provided: + @fetch, @configure, @build, @install, @clean, and finish. -R Ignore build failures, skip printing package logs, and continue building (relaxed mode.) diff --git a/etc/build.usage b/etc/build.usage index aeb775b3..8ba2445c 100644 --- a/etc/build.usage +++ b/etc/build.usage @@ -43,14 +43,14 @@ usage: ./build.sh [-a nt32|nt64] [-b debug|release] [-C dir[,..]] [-D kind[, with, resp. Currently defined build steps are: - fetch_download, fetch_extract, configure_patch_pre, - configure_autotools, configure_patch, configure, build, - install_subdirs, install_make, install_files, install_libs, - install, install_rpm, and clean. + fetch_clean, fetch_download, fetch_extract, configure_clean, + configure_patch_pre, configure_autotools, configure_patch, + configure, build_clean, build, install_clean, install_subdirs, + install_make, install_files, install_libs, install, install_rpm, + and clean. - Additionally, the following shorthand aliases and pseudo-steps are provided: - @fetch, @configure, @build, @install, and @clean, and - start and finish. + Additionally, the following virtual steps are provided: + @fetch, @configure, @build, @install, @clean, and finish. -R Ignore build failures, skip printing package logs, and continue building (relaxed mode.) diff --git a/midipix.env b/midipix.env index f0233986..51f3d40c 100644 --- a/midipix.env +++ b/midipix.env @@ -9,34 +9,42 @@ # # Build {step,variable}s -DEFAULT_BUILD_STEPS=" \ - start \ - fetch_download fetch_extract \ - configure_patch_pre configure_autotools configure_patch configure \ - build \ - install_subdirs install_make install_files install_libs install install_rpm \ - clean \ +DEFAULT_BUILD_STEPS=" \ + fetch_clean fetch_download fetch_extract \ + configure_clean configure_patch_pre configure_autotools configure_patch configure \ + build_clean build \ + install_clean install_subdirs install_make install_files install_libs install install_rpm \ + clean \ finish"; -DEFAULT_BUILD_VARS=" \ - AR BASE_DIR BUILD_DIR BUILD_STEPS_DISABLE BUILD_TYPE \ - CC CFLAGS_BUILD CFLAGS_BUILD_EXTRA CFLAGS_CONFIGURE \ - CFLAGS_CONFIGURE_EXTRA CONFIG_CACHE CONFIG_CACHE_EXTRA \ - CONFIG_CACHE_LOCAL CONFIGURE CONFIGURE_ARGS CONFIGURE_ARGS_EXTRA \ - CXX CXXFLAGS_CONFIGURE CXXFLAGS_CONFIGURE_EXTRA \ - DEPENDS DESTDIR DESTDIR_HOST DISABLED ENV_VARS_EXTRA \ - FNAME FORCE_AUTORECONF GITROOT INHERIT_FROM INSTALL_FILES \ - INSTALL_FILES_DESTDIR INSTALL_FILES_DESTDIR_EXTRA INSTALL_TARGET \ - INSTALL_TARGET_EXTRA IN_TREE LDFLAGS_BUILD_EXTRA LDFLAGS_CONFIGURE \ - LDFLAGS_CONFIGURE_EXTRA LIBTOOL MAKE MAKE_INSTALL_VNAME \ - MAKE_SUBDIRS MAKEFLAGS_BUILD MAKEFLAGS_BUILD_EXTRA \ - MAKEFLAGS_INSTALL MAKEFLAGS_INSTALL_EXTRA MAKEFLAGS_VERBOSITY \ - MIRRORS MIRRORS_GIT SOFORT_FORCE SOFORT_NATIVE_CC SOFORT_NATIVE_CFLAGS \ - SOFORT_NATIVE_CFLAGS_EXTRA SOFORT_NATIVE_CXX SOFORT_NATIVE_CXXFLAGS \ - SOFORT_NATIVE_CXXFLAGS_EXTRA SOFORT_NATIVE_LD SOFORT_NATIVE_LDFLAGS \ - SOFORT_NATIVE_LDFLAGS_EXTRA NO_CLEAN NO_CLEAN_BASE_DIR NO_LOG_VARS \ - PYTHON PATCHES_EXTRA PKG_CONFIG PKG_CONFIG_LIBDIR PKGLIST_DISABLE PREFIX \ +DEFAULT_BUILD_VARS=" \ + AR BASE_DIR BUILD_DIR BUILD_STEPS_DISABLE BUILD_TYPE \ + CC CFLAGS_BUILD CFLAGS_BUILD_EXTRA CFLAGS_CONFIGURE \ + CFLAGS_CONFIGURE_EXTRA CONFIG_CACHE CONFIG_CACHE_EXTRA \ + CONFIG_CACHE_LOCAL CONFIGURE CONFIGURE_ARGS CONFIGURE_ARGS_EXTRA \ + CXX CXXFLAGS_CONFIGURE CXXFLAGS_CONFIGURE_EXTRA \ + DEPENDS DESTDIR DESTDIR_HOST DISABLED ENV_VARS_EXTRA \ + FNAME FORCE_AUTORECONF GITROOT INHERIT_FROM INSTALL_FILES \ + INSTALL_FILES_DESTDIR INSTALL_FILES_DESTDIR_EXTRA INSTALL_TARGET \ + INSTALL_TARGET_EXTRA IN_TREE LDFLAGS_BUILD_EXTRA LDFLAGS_CONFIGURE \ + LDFLAGS_CONFIGURE_EXTRA LIBTOOL MAKE MAKE_INSTALL_VNAME \ + MAKE_SUBDIRS MAKEFLAGS_BUILD MAKEFLAGS_BUILD_EXTRA \ + MAKEFLAGS_INSTALL MAKEFLAGS_INSTALL_EXTRA MAKEFLAGS_VERBOSITY \ + MIRRORS MIRRORS_GIT SOFORT_FORCE SOFORT_NATIVE_CC SOFORT_NATIVE_CFLAGS \ + SOFORT_NATIVE_CFLAGS_EXTRA SOFORT_NATIVE_CXX SOFORT_NATIVE_CXXFLAGS \ + SOFORT_NATIVE_CXXFLAGS_EXTRA SOFORT_NATIVE_LD SOFORT_NATIVE_LDFLAGS \ + SOFORT_NATIVE_LDFLAGS_EXTRA NO_CLEAN NO_CLEAN_BASE_DIR NO_LOG_VARS \ + PYTHON PATCHES_EXTRA PKG_CONFIG PKG_CONFIG_LIBDIR PKGLIST_DISABLE PREFIX \ RANLIB RPM_DISABLE SHA256SUM SUBDIR TARGET URL URLS_GIT VERSION"; +# +# Prerequisite commands +DEFAULT_PREREQS=" \ + awk bunzip2 bzip2 cat chmod cmake cp date find flock \ + g++ gcc git grep gunzip gzip hostname id install kill \ + ln lzip make mkdir mkfifo mktemp mv paste patch perl \ + pgrep pkill printf readlink rm sed sha256sum sort \ + stat tail tar test touch tr uniq wget xz zip"; + # Path names : ${PREFIX_ROOT:="${HOME}/midipix"}; : ${PREFIX:="${PREFIX_ROOT}/${ARCH}/${BUILD_KIND}"}; @@ -48,36 +56,36 @@ DEFAULT_BUILD_VARS=" \ : ${BUILD_DLCACHEDIR:="${PREFIX_ROOT}/dlcache"}; : ${BUILD_WORKDIR:="${PREFIX}/tmp"}; : ${DEFAULT_CHECK_PATH_VARS:="PREFIX PREFIX_NATIVE PREFIX_CROSS BUILD_DLCACHEDIR BUILD_WORKDIR"}; -: ${DEFAULT_CLEAR_ENV_VARS_EXCEPT:=" \ - HOME PATH TERM USER \ - ARCH BUILD_KIND \ - BUILD_DLCACHEDIR BUILD_HNAME BUILD_WORKDIR \ +: ${DEFAULT_CLEAR_ENV_VARS_EXCEPT:=" \ + HOME PATH TERM USER \ + ARCH BUILD_KIND \ + BUILD_DLCACHEDIR BUILD_HNAME BUILD_WORKDIR \ PREFIX PREFIX_CROSS PREFIX_MINGW32 PREFIX_MINIPIX PREFIX_NATIVE PREFIX_ROOT PREFIX_RPM"}; : ${DEFAULT_CLEAR_PREFIX_PATHS:=" bin i686-nt32-midipix doc include info lib lib64 libexec man minipix minipix_dist native rpm sbin share tmp usr x86_64-nt64-midipix x86_64-w64-mingw32 pkglist.cross pkglist.host pkglist.native SHA256SUMS SHA256SUMS.last"}; -: ${DEFAULT_INSTALL_FILES_DESTDIR:=" \ - /=bin /=include /=lib /=lib/pkgconfig /=sbin \ - /=share /=share/doc /=share/info /=share/man \ - /=share/man/man1 /=share/man/man2 /=share/man/man3 /=share/man/man4 /=share/man/man5 \ - /=share/man/man6 /=share/man/man7 /=share/man/man8 /=share/man/man9 \ - @share/doc=doc \ - @share/info=info \ - @lib=lib64 \ - @share/man=man \ - @../lib/pkgconfig=share/pkgconfig \ +: ${DEFAULT_INSTALL_FILES_DESTDIR:=" \ + /=bin /=include /=lib /=lib/pkgconfig /=sbin \ + /=share /=share/doc /=share/info /=share/man \ + /=share/man/man1 /=share/man/man2 /=share/man/man3 /=share/man/man4 /=share/man/man5 \ + /=share/man/man6 /=share/man/man7 /=share/man/man8 /=share/man/man9 \ + @share/doc=doc \ + @share/info=info \ + @lib=lib64 \ + @share/man=man \ + @../lib/pkgconfig=share/pkgconfig \ @.=usr"}; -: ${DEFAULT_LOG_ENV_VARS:=" \ - ARCH BUILD_KIND BUILD_DLCACHEDIR BUILD_WORKDIR DEFAULT_GITROOT \ - HOME PATH PREFIX PREFIX_CROSS PREFIX_MINGW32 PREFIX_MINIPIX \ +: ${DEFAULT_LOG_ENV_VARS:=" \ + ARCH BUILD_KIND BUILD_DLCACHEDIR BUILD_WORKDIR DEFAULT_GITROOT \ + HOME PATH PREFIX PREFIX_CROSS PREFIX_MINGW32 PREFIX_MINIPIX \ PREFIX_NATIVE PREFIX_RPM USER"}; -: ${DEFAULT_MIRRORS:=" \ -https://midipix.org/mirror/ \ -https://midipix.lucioillanes.de/archives/ \ +: ${DEFAULT_MIRRORS:=" \ +https://midipix.org/mirror/ \ +https://midipix.lucioillanes.de/archives/ \ "}; -: ${DEFAULT_MIRRORS_GIT:=" \ -https://midipix.lucioillanes.de/repos_git/ \ +: ${DEFAULT_MIRRORS_GIT:=" \ +https://midipix.lucioillanes.de/repos_git/ \ "}; # Default flags & variables diff --git a/subr.rtl/rtl_complex.subr b/subr.rtl/rtl_complex.subr index 8866484f..61637f69 100644 --- a/subr.rtl/rtl_complex.subr +++ b/subr.rtl/rtl_complex.subr @@ -72,4 +72,12 @@ rtl_percentage() { printf "%d\n" "${_perc}"; }; +rtl_sunset() { + local _rs_rset="${1#\$}" _rs_kname="" IFS=" "; + eval set -- '${'"${_rs_rset}"'}'; + while [ "${#}" -gt 0 ]; do + unset "${_rs_rset}${_rs_kname}"; shift; + done; unset "${_rs_rset}"; +}; + # vim:filetype=sh diff --git a/subr.rtl/rtl_list.subr b/subr.rtl/rtl_list.subr index 29abef2e..e24973e9 100644 --- a/subr.rtl/rtl_list.subr +++ b/subr.rtl/rtl_list.subr @@ -46,6 +46,31 @@ rtl_lfilter() { printf "%s" "${_lnew}"; }; +rtl_lfilter2() { + local _rlist="${1#\$}" _rlist_new="${2#\$}" _filter="${3}" _sep="${4:- }" IFS="${4:-${IFS:- }}"\ + _filterfl="" _litem="" _litem_filter="" _lnew=""; + + if [ "${_filter:+1}" != 1 ]; then + eval ${_rlist_new}=; return 0; + else eval set -- '${'"${_rlist}"'}'\; ${_rlist_new}=; + while [ "${#}" -gt 0 ]; do + _litem="${1}"; shift; _filterfl=0; + for _litem_filter in ${_filter}; do + if [ "${_litem_filter}" = "${_litem}" ]; then + _filterfl=1; break; + fi; + done; + if [ "${_filterfl:-0}" -eq 0 ]; then + eval ${_rlist_new}='${'"${_rlist_new}"':+${'"${_rlist_new}"'}${_sep}}${_litem}'; + fi; + done; + fi; +}; + +rtl_lfilter3() { + rtl_lfilter2 "${1}" "${1}" "${2}" "${3:-}"; +}; + rtl_lfirst() { local _list="${1}" _sep="${2}" IFS; IFS="${_sep}"; set -- ${_list}; RTL_LFIRST_HEAD="${1}"; @@ -64,12 +89,29 @@ rtl_llength() { printf "%s" "${_llength}"; }; +rtl_llength2() { + local _rlist="${1#\$}" _rlen="${2#\$}" _sep="${3:- }" IFS="${3:-${IFS:- }}"; + eval set -- '${'"${_rlist}"'}'\; ${_rlen}='${#}'; +}; + rtl_llift() { local _list="${1}" _sep="${2}" _sep_new="${3}" IFS; IFS="${_sep}"; set -- ${_list}; IFS="${_sep_new}"; printf "%s" "${*}"; }; +rtl_llift2() { + local _rlist="${1#\$}" _rlist_new="${2#\$}" _sep="${3}" \ + _sep_new="${4}" IFS; IFS="${_sep}"; + + eval set -- '${'"${_rlist}"'}'; IFS="${_sep_new}"; + eval ${_rlist_new}='"${*}"'; +}; + +rtl_llift3() { + rtl_llift2 "${1}" "${1}" "${2}" "${3}"; +}; + rtl_lmatch() { local _list="${1}" _item="${2}" _sep="${3:- }"; [ -n "$(rtl_lsearch "${_list}" "${_item}" "${_sep}")" ]; diff --git a/subr.rtl/rtl_state.subr b/subr.rtl/rtl_state.subr index 203ec520..da091e9c 100644 --- a/subr.rtl/rtl_state.subr +++ b/subr.rtl/rtl_state.subr @@ -23,16 +23,22 @@ rtl_state_set() { }; rtl_state_test() { - local _workdir="${1}" _pkg_name="${2}" _build_step="${3}" _restart_at="${4:-}" _done_fname=""; - _done_fname="${_workdir}/.${_pkg_name}.${_build_step}"; - if [ -z "${_restart_at}" ]\ - || [ "${_restart_at}" = "LAST" ]; then - rtl_fileop test "${_done_fname}"; - elif [ "${_restart_at}" = "ALL" ]; then - return 1; - else - ! rtl_lmatch "${_restart_at}" "${_build_step}" ","; - fi; + local _workdir="${1}" _pkg_name="${2}" _build_steps="${3}" \ + _restart_at="${4:-}" _build_step="" _done_fname="" \ + IFS="," _rc=0; + + for _build_step in ${_build_steps}; do + _done_fname="${_workdir}/.${_pkg_name}.${_build_step}"; + if [ "${_restart_at:+1}" != 1 ]\ + || [ "${_restart_at}" = "LAST" ]; then + rtl_fileop test "${_done_fname}"; _rc="${?}"; + elif [ "${_restart_at}" = "ALL" ]; then + _rc=1; + else + rtl_lmatch "${_restart_at}" "${_build_step}" ","; + _rc=$((${?} ? 0 : 1)); + fi; [ "${_rc}" -eq 0 ] && break; + done; return "${_rc}"; }; # vim:filetype=sh diff --git a/subr/build_init.subr b/subr/build_init.subr index f5894e69..2d78da91 100644 --- a/subr/build_init.subr +++ b/subr/build_init.subr @@ -2,145 +2,8 @@ # set +o errexit -o noglob -o nounset is assumed. # -buildp_expand_restart_at() { - local _restart_at_spec="${1}" _restart_at="" _restart_at_spec_new=""; - - for _restart_at in $(rtl_llift "${_restart_at_spec}" "," " "); do - case "${_restart_at}" in - @fetch) _restart_at="fetch_download,fetch_extract"; ;; - @configure) - _restart_at="configure_patch_pre,configure_autotools,configure_patch,configure"; ;; - @build) _restart_at="build"; ;; - @install) - _restart_at="install_subdirs,install_make,install_files,install_libs,install,install_rpm"; ;; - @clean) - _restart_at="clean"; ;; - *) ;; - esac; - _restart_at_spec_new="$(rtl_lconcat "${_restart_at_spec_new}" "${_restart_at}" ",")" - done; - printf "%s" "${_restart_at_spec_new}"; -}; - -buildp_expand_restart_recursive() { - local _restart_spec="${1}" _last_pkg="" _restart_spec_at="" _restart_spec_recursive=0; - - case "${_restart_spec}" in - \*\*\*[a-zA-Z]*) - _restart_spec="${_restart_spec#\*\*\*}"; _restart_spec_recursive=3; ;; - \*\*[a-zA-Z]*) _restart_spec="${_restart_spec#\*\*}"; _restart_spec_recursive=2; ;; - \*[a-zA-Z]*) _restart_spec="${_restart_spec#\*}"; _restart_spec_recursive=1; ;; - ALL) _restart_spec_at=ALL; _restart_spec_recursive=2; ;; - LAST) _restart_spec_at=ALL; _restart_spec_recursive=0; - if [ -n "${DEFAULT_BUILD_LAST_FAILED_PKG_FNAME}" ]\ - && [ -e "${DEFAULT_BUILD_LAST_FAILED_PKG_FNAME}" ]; then - _last_pkg="$(cat "${DEFAULT_BUILD_LAST_FAILED_PKG_FNAME}")"; - rtl_fileop rm "${DEFAULT_BUILD_LAST_FAILED_PKG_FNAME}"; - rtl_state_clear "${BUILD_WORKDIR}" "${_last_pkg}"; - _restart_spec="${_last_pkg}"; - else - _status="cannot rebuild last failed package"; return 1; - fi; ;; - esac; - ARG_RESTART="${_restart_spec}"; - ARG_RESTART_AT="${_restart_spec_at}"; - ARG_RESTART_RECURSIVE="${_restart_spec_recursive}"; - return 0; -}; - -buildp_process_restart_spec() { - local _restart_spec="${1}" _eqfl=0 _ltfl=0 _restart_spec_at0="" _restart_spec_at="" _step="" _step1=""; _status=""; - - buildp_expand_restart_recursive "${_restart_spec}" || return "${?}"; - _restart_spec="${ARG_RESTART}"; _restart_spec_at="${ARG_RESTART_AT}"; - - case "${_restart_spec}" in - "") return 0; ;; - *:*) - _restart_spec_at="${_restart_spec#*:}"; _restart_spec="${_restart_spec%%:*}"; - _restart_spec_at0="${_restart_spec_at}"; _restart_spec_at=""; - case "${_restart_spec_at0}" in - ALL|LAST) - _restart_spec_at="${_restart_spec_at0}"; ;; - - ^*) _restart_spec_at0="${_restart_spec_at0#^}"; - _restart_spec_at0="$(buildp_expand_restart_at "${_restart_spec_at0}")"; - _restart_spec_at="$(rtl_llift "${DEFAULT_BUILD_STEPS}" " " ",")"; - for _restart_at in $(rtl_llift "${_restart_spec_at0}" "," " "); do - _restart_spec_at="$(rtl_lfilter "${_restart_spec_at}" "${_restart_at}" ",")"; - done; _restart_spec_at="$(rtl_lfilter "${_restart_spec_at}" "finish" ",")"; ;; - - \<=*|\<*|\>=*|\>*) - [ "${_restart_spec_at0#<}" != "${_restart_spec_at0}" ] && _ltfl=1; - if [ "${_restart_spec_at0#[<>]=}" != "${_restart_spec_at0}" ]; then - _restart_spec_at0="${_restart_spec_at0#[<>]=}"; _eqfl=1; - else - _restart_spec_at0="${_restart_spec_at0#[<>]}"; _eqfl=0; - fi; _restart_spec_at=""; - _restart_spec_at0="$(buildp_expand_restart_at "${_restart_spec_at0%%,*}")"; - if [ \( "${_eqfl}" -eq 1 \) -a \( "${_ltfl}" -eq 1 \) ]\ - || [ \( "${_eqfl}" -eq 0 \) -a \( "${_ltfl}" -eq 0 \) ]; then - _restart_spec_at0="${_restart_spec_at0##*,}"; - elif [ \( "${_eqfl}" -eq 1 \) -a \( "${_ltfl}" -eq 0 \) ]\ - || [ \( "${_eqfl}" -eq 0 \) -a \( "${_ltfl}" -eq 1 \) ]; then - _restart_spec_at0="${_restart_spec_at0%%,*}"; - fi; - for _restart_at in ${DEFAULT_BUILD_STEPS}; do - if [ "${_ltfl}" -eq 1 ]; then - if [ "${_restart_at}" = "${_restart_spec_at0%%,*}" ]; then - if [ "${_eqfl}" -eq 1 ]; then - _restart_spec_at="$(rtl_lconcat "${_restart_spec_at}" "${_restart_at}" ",")"; - fi; break; - fi; - else - if [ "${_restart_at}" = "${_restart_spec_at0%%,*}" ]; then - _foundfl=1; [ "${_eqfl}" -eq 0 ] && continue; - fi; [ "${_foundfl}" -eq 0 ] && continue; - fi; - _restart_spec_at="$(rtl_lconcat "${_restart_spec_at}" "${_restart_at}" ",")"; - done; ;; - - *) _restart_spec_at="$(buildp_expand_restart_at "${_restart_spec_at0}")"; ;; - esac; ;; - - *) _restart_spec_at=ALL; ;; - esac; - - ARG_RESTART="$(rtl_llift "${_restart_spec}" "," " ")"; - ARG_RESTART_AT="${_restart_spec_at}"; - if [ "${#ARG_RESTART_AT}" -eq 0 ]; then - _status="zero-length build step list"; return 1; - elif [ "${ARG_RESTART_AT}" != "ALL" ]\ - && [ "${ARG_RESTART_AT}" != "LAST" ]; then - for _restart_at in $(rtl_lfilter "$(rtl_llift "${ARG_RESTART_AT}" "," " ")" "${DEFAULT_BUILD_STEPS}"); do - case "${_restart_at}" in - start) ;; - *) _status="unknown build step \`${_restart_at}'"; return 1; ;; - esac; - done; - fi; - if [ "${#ARG_RESTART_AT}" -gt 0 ]\ - && [ "${ARG_RESTART_AT}" != "ALL" ]\ - && [ "${ARG_RESTART_AT}" != "LAST" ]; then - _restart_spec_at="${ARG_RESTART_AT}"; ARG_RESTART_AT=""; - for _restart_at in ${DEFAULT_BUILD_STEPS}; do - if rtl_lmatch "${_restart_spec_at}" "${_restart_at}" ","; then - ARG_RESTART_AT="$(rtl_lconcat "${ARG_RESTART_AT}" "${_restart_at}" ",")"; - fi; - done; - if [ "${ARG_RESTART_AT##*,}" != "finish" ]; then - _step="$(rtl_lfilter "${ARG_RESTART_AT}" "clean,finish" ",")"; _step="${_step##*,}"; - _step1="$(rtl_lfilter "${DEFAULT_BUILD_STEPS}" "clean finish")"; _step1="${_step1##* }"; - if [ "${_step}" = "${_step1}" ]; then - ARG_RESTART_AT="$(rtl_lconcat "${ARG_RESTART_AT}" "finish" ",")"; - fi; - fi; - fi; - return 0; -}; - buildp_init_args() { - local _eqfl=0 _foundfl=0 _group="" _pkg_names_unknown="" _rc=0 \ + local _foundfl=0 _group="" _pkg_names_unknown="" _rc=0 \ EX_PKG_BUILD_GROUPS EX_PKG_BUILD_GROUPS_NOAUTO; _status=""; case "${ARG_FETCH_FORCE}" in @@ -149,26 +12,26 @@ buildp_init_args() { ipv6) DEFAULT_GIT_ARGS="$(rtl_lconcat "-6" "${DEFAULT_GIT_ARGS}")"; DEFAULT_WGET_ARGS="$(rtl_lconcat "-6" "${DEFAULT_WGET_ARGS}")"; ;; esac; - if [ -z "${BUILD_HNAME:-}" ]\ + if [ "${BUILD_HNAME:+1}" != 1 ]\ && ! BUILD_HNAME="$(hostname)"; then _rc=1; _status="Error: failed to obtain hostname."; elif [ "${ARG_DUMP_ON_ABORT:-0}" -eq 1 ]\ - && [ "${ARG_RELAXED:-0}" -eq 1 ]; then + && [ "${ARG_RELAXED:-0}" -eq 1 ]; then _rc=1; _status="Error: --dump-on-abort excludes -R."; elif [ "${ARG_AS_NEEDED:-0}" -eq 1 ]\ - && [ -e "${PREFIX}/build.gitref" ]\ - && [ "$(git rev-parse HEAD)" = "$(cat "${PREFIX}/build.gitref")" ]; then + && [ -e "${PREFIX}/build.gitref" ]\ + && [ "$(git rev-parse HEAD)" = "$(cat "${PREFIX}/build.gitref")" ]; then _rc=0; _status="Git repository has not changed since last build and --as-needed was specified."; - elif ! buildp_process_restart_spec "${ARG_RESTART:-}"; then + elif ! ex_pkg_process_restart_spec \$ARG_RESTART \$ARG_RESTART_AT \$ARG_RESTART_RECURSIVE; then _rc=1; _status="Error: failed to process -r specification: ${_status}."; elif ! ex_pkg_load_groups; then _rc=1; _status="Error: failed to load build groups."; else if ! rtl_lmatch "${ARG_DIST:-}" "rpm" ","\ - && [ -z "${ARG_DUMP_IN:-}" ]\ + && [ "${ARG_DUMP_IN:+1}" != 1 ]\ && [ "${ARG_DUMP_ON_ABORT:-0}" -eq 0 ]; then EX_PKG_BUILD_GROUPS="$(rtl_lfilter "${EX_PKG_BUILD_GROUPS}" "host_deps_rpm")"; fi; - if [ -z "${BUILD_GROUPS}" ]; then + if [ "${BUILD_GROUPS:+1}" != 1 ]; then BUILD_GROUPS="${EX_PKG_BUILD_GROUPS}"; else _foundfl=0; for _group in ${BUILD_GROUPS}; do if rtl_lmatch "${EX_PKG_BUILD_GROUPS}" "${_group}"; then @@ -184,10 +47,11 @@ buildp_init_args() { fi; fi; if [ "${_rc:-0}" -eq 0 ]; then - if [ -n "${ARG_DIST}" ]; then + if [ "${ARG_DIST:+1}" = 1 ]; then BUILD_GROUPS="$(rtl_lconcat "$(rtl_lfilter "${BUILD_GROUPS}" "dist")" "dist")"; fi; - if [ -n "${ARG_RESTART}" ] && ! rtl_lmatch "${ARG_RESTART}" "ALL LAST"; then + if [ "${ARG_RESTART:+1}" = 1 ]\ + && ! rtl_lmatch "${ARG_RESTART}" "ALL LAST"; then for _pkg_name in ${ARG_RESTART}; do if ! ex_pkg_find_package "${BUILD_GROUPS}" "${_pkg_name}" >/dev/null; then _pkg_names_unknown="$(rtl_lconcat "${_pkg_names_unknown}" "${_pkg_name}")"; @@ -205,6 +69,7 @@ buildp_init_args() { buildp_init_env() { local _fname="" _rc=0; _status=""; + if ! cd "${0%/*}"; then printf "Error: failed to change working directory to \`${0%/*}'." >&2; exit 1; elif ! umask 022; then @@ -221,6 +86,7 @@ buildp_init_env() { buildp_init_files() { local _log_last_fname="" _log_last_num=1 _rc=0; _status="" + if ! rtl_fileop mkdir "${BUILD_DLCACHEDIR}" "${BUILD_WORKDIR}"\ || rtl_lmatch "${ARG_DIST}" "rpm" ","\ && ! rtl_fileop mkdir "${PREFIX_RPM}"; then @@ -359,16 +225,11 @@ buildp_init_getopts() { }; buildp_init_prereqs() { - if ! rtl_check_prereqs \ - awk bunzip2 bzip2 cat chmod cmake cp date find flock \ - g++ gcc git grep gunzip gzip hostname id install kill \ - ln lzip make mkdir mkfifo mktemp mv paste patch perl \ - pgrep pkill printf readlink rm sed sha256sum sort \ - stat tail tar test touch tr uniq wget xz zip; then + if ! rtl_check_prereqs ${DEFAULT_PREREQS}; then printf "%s\n" "${_status}" >&2; exit 1; elif ! awk -V 2>/dev/null | grep -q "^GNU Awk "; then printf "Error: awk(1) in \$PATH must be GNU Awk." >&2; exit 1; - elif ! (FNAME="$(mktemp)" && { trap "rm -f \"\${FNAME}\"" EXIT; \ + elif ! (FNAME="$(mktemp)" && { trap "rm -f \"\${FNAME}\"" EXIT; \ sed -i'' -e '' "${FNAME}" >/dev/null 2>&1; }); then printf "Error: sed(1) in \${PATH} does not support the \`-i' option.\n" >&2; exit 1; fi; @@ -378,8 +239,8 @@ build_init() { local _rc=0; _status=""; if ! buildp_init_env \ || ! buildp_init_getopts "${@}" \ - || ! buildp_init_prereqs \ || ! ex_pkg_load_vars \ + || ! buildp_init_prereqs \ || ! buildp_init_args \ || ! buildp_init_files; then _rc=1; _status="${_status}"; diff --git a/subr/ex_pkg_exec.subr b/subr/ex_pkg_exec.subr index ee49b87d..f20c5c38 100644 --- a/subr/ex_pkg_exec.subr +++ b/subr/ex_pkg_exec.subr @@ -94,7 +94,7 @@ ex_pkg_exec() { _rc=1; elif rtl_test_cmd "pkg_${_pkg_name}_all"; then "pkg_${_pkg_name}_all" "${_restart_at}"; _rc="${?}"; - else set -- $(rtl_lfilter "${PKG_BUILD_STEPS}" "start"); + else set -- ${PKG_BUILD_STEPS}; while [ ${#} -gt 0 ]; do _step="${1}"; shift; if [ "${#_restart_at}" -gt 0 ]\ diff --git a/subr/ex_pkg_restart.subr b/subr/ex_pkg_restart.subr new file mode 100644 index 00000000..20e35b63 --- /dev/null +++ b/subr/ex_pkg_restart.subr @@ -0,0 +1,286 @@ +# +# set +o errexit -o noglob -o nounset is assumed. +# + +# +# exp_pkg_check_restart_at() - XXX +# @_rspec_at: in reference to restart build step list +# +# Calling convention: in ref. @_rspec_at +# Returns: zero (0) on success, non-zero (>0) on failure +# +exp_pkg_check_restart_at() { + local _epcra_rspec_at="${1#\$}" _epcra_len="" _epcra_rc=0 _epcra_spec_at=""; _status="" + + if ! rtl_llift2 "${_epcra_rspec_at}" \$_epcra_spec_at "," " "\ + || ! rtl_lfilter3 \$_epcra_spec_at "${DEFAULT_BUILD_STEPS} ALL LAST"\ + || ! rtl_llength2 \$_epcra_spec_at \$_epcra_len; then + _epcra_rc=1; + elif [ "${_epcra_len}" -gt 0 ]; then + _status="unknown build step(s) \`${_epcra_spec_at}'"; _epcra_rc=1; + fi; return "${_epcra_rc}"; +}; + +# +# exp_pkg_expand_restart_at_spec() - XXX +# @_rset: in reference to restart virtual build step set +# @_rspec_at: inout reference to restart build step list +# +# Calling convention: in ref. @_rset, inout ref. @_rspec_at +# Returns: zero (0) on success, non-zero (>0) on failure +# +exp_pkg_expand_restart_at_spec() { + local _eperas_rset="${1#\$}" _eperas_rspec_at="${2#\$}" _eperas_at="" \ + _eperas_rc=0 _eperas_spec_at="" _eperas_spec_at_=""; _status=""; + eval _eperas_spec_at='${'"${_eperas_rspec_at}"'}'; + + case "${_eperas_spec_at}" in + ALL|LAST|"") + ;; + + ^*) + _eperas_spec_at="${_eperas_spec_at#^}"; + if exp_pkg_expand_restart_at_virtual \ + "${_eperas_spec_at}" \$_eperas_spec_at \ + "${_eperas_rset}" \ + && exp_pkg_check_restart_at \$_eperas_spec_at; then + rtl_llift2 \$DEFAULT_BUILD_STEPS "${_eperas_rspec_at}" " " ","; + rtl_llift2 \$_eperas_spec_at \$_eperas_spec_at_ "," " "; + for _eperas_at in ${_eperas_spec_at_}; do + rtl_lfilter3 "${_eperas_rspec_at}" "${_eperas_at}" ","; + done; rtl_lfilter3 "${_eperas_rspec_at}" "finish" ","; + else + _eperas_rc=1; + fi; ;; + + \<=*|\<*|\>=*|\>*) + exp_pkg_expand_restart_at_spec_cmp \ + "${_eperas_rset}" "${_eperas_rspec_at}"; _eperas_rc="${?}"; ;; + + *) + if ! exp_pkg_expand_restart_at_virtual \ + "${_eperas_spec_at}" "${_eperas_rspec_at}" \ + "${_eperas_rset}"; then + _eperas_rc=1; + fi; ;; + esac; + + if [ "${_eperas_rc}" -eq 0 ]; then + if ! exp_pkg_check_restart_at "${_eperas_rspec_at}"; then + _epprs_rc=1; + elif eval [ '"${'"${_eperas_rspec_at}"':+1}"' != 1 ]; then + _status="zero-length build step list"; _epprs_rc=1; + fi; + fi; + return "${_eperas_rc}"; +}; + +# +# exp_pkg_expand_restart_at_spec_cmp() - XXX +# @_rset: in reference to restart virtual build step set +# @_rspec_at: inout reference to restart build step list +# +# Calling convention: in ref. @_rset, inout ref. @_rspec_at +# Returns: zero (0) on success, non-zero (>0) on failure +# +exp_pkg_expand_restart_at_spec_cmp() { + local _eperasc_rset="${1#\$}" _eperasc_rspec_at="${2#\$}" _eperasc_at="" \ + _eperasc_eqfl="" _eperasc_foundfl="" _eperasc_ltfl="" _eperasc_rc=0 \ + _eperasc_spec_at="" _eperasc_spec_at0=""; + eval _eperasc_spec_at0='${'"${_eperasc_rspec_at}"'}'; + + [ "${_eperasc_spec_at0#<}" = "${_eperasc_spec_at0}" ]; _eperasc_ltfl="${?}"; + if [ "${_eperasc_spec_at0#[<>]=}" != "${_eperasc_spec_at0}" ]; then + _eperasc_spec_at0="${_eperasc_spec_at0#[<>]=}"; _eperasc_eqfl=1; + else + _eperasc_spec_at0="${_eperasc_spec_at0#[<>]}"; _eperasc_eqfl=0; + fi; _eperasc_spec_at=""; + + if exp_pkg_expand_restart_at_virtual \ + "${_eperasc_spec_at0%%,*}" \$_eperasc_spec_at0 \ + "${_eperasc_rset}" \ + && exp_pkg_check_restart_at \$_eperasc_spec_at0; then + if [ \( "${_eperasc_eqfl}" -eq 1 \) -a \( "${_eperasc_ltfl}" -eq 1 \) ]\ + || [ \( "${_eperasc_eqfl}" -eq 0 \) -a \( "${_eperasc_ltfl}" -eq 0 \) ]; then + _eperasc_spec_at0="${_eperasc_spec_at0##*,}"; + elif [ \( "${_eperasc_eqfl}" -eq 1 \) -a \( "${_eperasc_ltfl}" -eq 0 \) ]\ + || [ \( "${_eperasc_eqfl}" -eq 0 \) -a \( "${_eperasc_ltfl}" -eq 1 \) ]; then + _eperasc_spec_at0="${_eperasc_spec_at0%%,*}"; + fi; + + _eperasc_foundfl=0; for _eperasc_at in ${DEFAULT_BUILD_STEPS}; do + if [ "${_eperasc_ltfl}" -eq 1 ]; then + if [ "${_eperasc_at}" = "${_eperasc_spec_at0%%,*}" ]; then + if [ "${_eperasc_eqfl}" -eq 1 ]; then + _eperasc_spec_at="${_eperasc_spec_at:+${_eperasc_spec_at},}${_eperasc_at}"; + fi; break; + fi; + else + if [ "${_eperasc_at}" = "${_eperasc_spec_at0%%,*}" ]; then + _eperasc_foundfl=1; [ "${_eperasc_eqfl}" -eq 0 ] && continue; + fi; [ "${_eperasc_foundfl}" -eq 0 ] && continue; + fi; + _eperasc_spec_at="${_eperasc_spec_at:+${_eperasc_spec_at},}${_eperasc_at}"; + done; + else + _eperasc_rc=1; + fi; + + eval ${_eperasc_rspec_at}='${_eperasc_spec_at}'; + return "${_eperasc_rc}"; +}; + +# +# exp_pkg_expand_restart_at_virtual() - XXX +# @_spec_at: restart build step list +# @_rspec_at_new: out reference to new restart build step list +# @_rset: inout reference to restart virtual build step set +# +# Calling convention: inout ref. @_rspec_recursive +# Returns: zero (0) on success, non-zero (>0) on failure +# +exp_pkg_expand_restart_at_virtual() { + local _epera_spec_at="${1}" _epera_rspec_at_new="${2#\$}" _epera_rset="${3#\$}" \ + _epera_at="" _epera_IFS0="${IFS:- }" _epera_rc=0 _epera_spec_at_new="" \ + IFS; _status=""; + + eval ${_epera_rspec_at_new}=; + IFS=","; set -- ${_epera_spec_at}; IFS="${_epera_IFS0}"; + while [ "${#}" -gt 0 ]; do + _epera_at="${1}"; shift; + if [ "${_epera_at#@}" != "${_epera_at}" ]; then + _epera_at="${_epera_at#@}"; + if [ "${_epera_at%[^0-9a-zA-Z_]*}" != "${_epera_at}" ]; then + _status="invalid virtual build step \`${_epera_at}'"; _epera_rc=1; + elif eval [ '"${'"${_epera_rset}${_epera_at}"':+1}"' = 1 ]; then + eval _epera_at='${'"${_epera_rset}${_epera_at}"'}'; + else + _status="unknown virtual build step \`${_epera_at}'"; _epera_rc=1; + fi; + fi; + eval ${_epera_rspec_at_new}='${'"${_epera_rspec_at_new}"':+${'"${_epera_rspec_at_new}"'},}${_epera_at}'; + done; + return "${_epera_rc}"; +}; + +# +# exp_pkg_expand_restart_recursive() - XXX +# @_rspec: inout reference to restart {specification,package name list} +# @_rrecursive: out reference to recursion flag +# +# Calling convention: inout ref. @_rspec, out ref. @_rrecursive +# Returns: zero (0) on success, non-zero (>0) on failure +# +exp_pkg_expand_restart_recursive() { + local _eperr_rspec="${1#\$}" _eperr_rrecursive="${2#\$}" _eperr_spec=""; _status="" + eval _eperr_spec='${'"${_eperr_rspec}"'}'; + + case "${_eperr_spec}" in + \*\*\*[a-zA-Z]*) + eval ${_eperr_rspec}='${_eperr_spec#\*\*\*}' ${_eperr_rrecursive}=3; ;; + \*\*[a-zA-Z]*) eval ${_eperr_rspec}='${_eperr_spec#\*\*}' ${_eperr_rrecursive}=2; ;; + \*[a-zA-Z]*) eval ${_eperr_rspec}='${_eperr_spec#\*}' ${_eperr_rrecursive}=1; ;; + ALL) eval ${_eperr_rrecursive}=2; ;; + LAST) eval ${_eperr_rrecursive}=0; ;; + esac; + return 0; +}; + +# +# exp_pkg_expand_restart_spec() - XXX +# @_rspec: inout reference to restart {specification,package name list} +# @_rspec_at: out reference to restart build step list +# +# Calling convention: inout ref. @_rspec, out ref. @_rspec_at, out ref. @_rrecursive +# Returns: zero (0) on success, non-zero (>0) on failure +# +exp_pkg_expand_restart_spec() { + local _epers_rspec="${1#\$}" _epers_rspec_at="${2#\$}" _epers_last_pkg="" \ + _epers_rc=0 _epers_spec="" _epers_spec_at="" _epers_spec_at0=""; + eval _epers_spec='${'"${_epers_rspec}"'}'; + + case "${_epers_spec}" in + "") eval ${_eppras_rspec_at}=; ;; + ALL) eval ${_epers_rspec_at}=ALL; ;; + LAST|LAST:*) + case "${_epers_spec}" in + LAST) eval ${_epers_rspec_at}=LAST; ;; + LAST:*) eval ${_epers_rspec_at}='${_epers_spec#LAST:}'; ;; + esac; + if [ "${DEFAULT_BUILD_LAST_FAILED_PKG_FNAME:+1}" = 1 ]\ + && [ -e "${DEFAULT_BUILD_LAST_FAILED_PKG_FNAME}" ]; then + if read -r _epers_last_pkg <"${DEFAULT_BUILD_LAST_FAILED_PKG_FNAME}"\ + && rtl_fileop rm "${DEFAULT_BUILD_LAST_FAILED_PKG_FNAME}"; then + eval ${_epers_rspec}='${_epers_last_pkg}'; + else + _status="failed to read or clear status of last failed package \`${_epers_last_pkg}'"; _epers_rc=1; + fi; + else + _status="cannot rebuild last failed package"; _epers_rc=1; + fi; ;; + + *:*) eval ${_epers_rspec}='${_epers_spec%:*}' ${_epers_rspec_at}='${_epers_spec#*:}'; ;; + *) eval ${_epers_rspec_at}= ${_epers_rspec_at}=ALL; ;; + esac; + return "${_epers_rc}"; +}; + +# +# exp_pkg_init_restart_at_virtual() - XXX +# @_rset: out reference to restart virtual build step set +# +# Calling convention: out ref. @_rset +# Returns: zero (0) on success, non-zero (>0) on failure +# +exp_pkg_init_restart_at_virtual() { + local _eperav_rset="${1#\$}" _eperav_step="" _eperav_step_virtual="" _epera_steps=""; + + rtl_lfilter2 \$DEFAULT_BUILD_STEPS \$_epera_steps "finish"; + for _eperav_step in ${_epera_steps}; do + _eperav_step_virtual="${_eperav_step%%_*}"; + if eval [ '"${'"${_eperav_rset}${_eperav_step_virtual}"':+1}"' != 1 ]; then + eval ${_eperav_rset}='"${'"${_eperav_rset}"':+${'"${_eperav_rset}"'},}${_eperav_step_virtual}"'; + fi; + eval ${_eperav_rset}${_eperav_step_virtual}='"${'"${_eperav_rset}${_eperav_step_virtual}"':+${'"${_eperav_rset}${_eperav_step_virtual}"'},}${_eperav_step}"'; + done; return 0; +}; + +# +# ex_pkg_process_restart_spec() - XXX +# @_rspec: inout reference to restart {specification,package name list} +# @_rspec_at: out reference to restart build step list +# @_rrecursive: out reference to restart recursion flag +# +# Calling convention: inout ref. @_rspec, out ref. @_rspec_at +# Returns: zero (0) on success, non-zero (>0) on failure +# +ex_pkg_process_restart_spec() { + local _epprs_rspec="${1#\$}" _epprs_rspec_at="${2#\$}" _epprs_rrecursive="${3#\$}" \ + _epprs_at="" _epprs_rc=0 _epprs_spec_at_new="" _epprs_step="" _epprs_step1="" \ + _epprs_virtual_set=""; _status=""; + + if exp_pkg_init_restart_at_virtual \$_epprs_virtual_set \ + && exp_pkg_expand_restart_spec "${_epprs_rspec}" \$_epprs_spec_at_new \ + && exp_pkg_expand_restart_recursive "${_epprs_rspec}" "${_epprs_rrecursive}" \ + && exp_pkg_expand_restart_at_spec \$_epprs_virtual_set \$_epprs_spec_at_new; then + eval ${_epprs_rspec_at}=; + for _epprs_at in ${DEFAULT_BUILD_STEPS}; do + if rtl_lmatch "${_epprs_at}" "${_epprs_spec_at_new}" ","; then + eval ${_epprs_rspec_at}='${'"${_epprs_rspec_at}"':+${'"${_epprs_rspec_at}"'},}${_epprs_at}'; + fi; + done; + if eval [ '"${'"${_epprs_rspec_at}"'##*,}"' != "finish" ]; then + rtl_lfilter2 "${_epprs_rspec_at}" \$_epprs_step "clean,finish" ","; _epprs_step="${_epprs_step##*,}"; + rtl_lfilter2 \$DEFAULT_BUILD_STEPS \$_epprs_step1 "clean finish"; _epprs_step1="${_epprs_step1##* }"; + if [ "${_epprs_step}" = "${_epprs_step1}" ]; then + eval ${_epprs_rspec_at}='${'"${_epprs_rspec_at}"':+${'"${_epprs_rspec_at}"'},}finish'; + fi; + fi; + else + _epprs_rc=1; + fi; + rtl_sunset \$_epprs_virtual_set; + return "${_epprs_rc}"; +}; + +# vim:filetype=sh diff --git a/subr/pkg_build_clean.subr b/subr/pkg_build_clean.subr new file mode 100644 index 00000000..55dc19c5 --- /dev/null +++ b/subr/pkg_build_clean.subr @@ -0,0 +1,33 @@ +# +# set +o errexit -o noglob -o nounset is assumed. +# + +pkg_build_clean() { + local _libtool="" _makeflags_verbosity="${PKG_MAKEFLAGS_VERBOSITY:-}" \ + _no_autoconf="" _rc=0 _subdir=""; + + if ex_pkg_state_test "${_pkg_name}" "build" "${_restart_at}"; then + case "${PKG_LIBTOOL:-}" in + "") _libtool=""; ;; + none) _libtool=""; ;; + *) _libtool="${PKG_LIBTOOL}"; ;; + esac; + [ ! -x "${PKG_CONFIGURE:-}" ] && _no_autoconf=1; + + for _subdir in ${PKG_MAKE_SUBDIRS:-:}; do + [ "${_subdir}" = ":" ] && _subdir=""; + [ "${#_libtool}" -gt 0 ] && export MAKE="make LIBTOOL=${_libtool}"; + rtl_run_cmd_unsplit "${PKG_MAKE}" \ + ${PKG_MAKEFLAGS_BUILD:-} \ + ${PKG_MAKEFLAGS_BUILD_EXTRA:-} \ + ${_libtool:+"LIBTOOL=${_libtool}"} \ + ${_makeflags_verbosity} \ + ${_subdir:+-C "${_subdir}"} \ + clean; _rc="${?}"; + [ "${#_libtool}" -gt 0 ] && unset MAKE; + [ "${_rc}" -ne 0 ] && return 1; + done; return 0; + fi; +}; + +# vim:filetype=sh diff --git a/subr/pkg_configure_clean.subr b/subr/pkg_configure_clean.subr new file mode 100644 index 00000000..48549a90 --- /dev/null +++ b/subr/pkg_configure_clean.subr @@ -0,0 +1,20 @@ +# +# set +o errexit -o noglob -o nounset is assumed. +# + +pkg_configure_clean() { + local _group_name="${1}" _pkg_name="${2}" _restart_at="${3}"; + + if ex_pkg_state_test \ + "${_pkg_name}" \ + "configure_patch_pre,configure_autotools,configure_patch,configure" \ + "${_restart_at}"; then + if [ "${PKG_BUILD_DIR:-}" != "${PKG_SUBDIR:-}" ]; then + rtl_fileop rm "${PKG_BUILD_DIR}" || return 1; + rtl_fileop mkdir "${PKG_BUILD_DIR}" || return 1; + rtl_fileop cd "${PKG_BUILD_DIR}" || return 1; + fi; + fi; +}; + +# vim:filetype=sh diff --git a/subr/pkg_fetch_clean.subr b/subr/pkg_fetch_clean.subr new file mode 100644 index 00000000..a56196cb --- /dev/null +++ b/subr/pkg_fetch_clean.subr @@ -0,0 +1,21 @@ +# +# set +o errexit -o noglob -o nounset is assumed. +# + +pkg_fetch_clean() { + local _dname=""; + + if [ -n "${PKG_URLS_GIT:-}" ]; then + if [ -n "${PKG_SUBDIR:-}" ]\ + && [ "${PKG_SUBDIR}" != "${PKG_URLS_GIT%%=*}" ]; then + rtl_fileopm rm "${PKG_SUBDIR}"; + fi; + for _dname in ${PKG_URLS_GIT}; do + _dname="${_dname%%=*}"; rtl_fileop rm "${_dname}"; + done; + elif [ -n "${PKG_SUBDIR}" ]; then + rtl_fileop rm "${PKG_SUBDIR}"; + fi; return 0; +}; + +# vim:filetype=sh diff --git a/subr/pkg_install_clean.subr b/subr/pkg_install_clean.subr new file mode 100644 index 00000000..3d99f321 --- /dev/null +++ b/subr/pkg_install_clean.subr @@ -0,0 +1,12 @@ +# +# set +o errexit -o noglob -o nounset is assumed. +# + +pkg_install_clean() { + if [ -n "${PKG_DESTDIR:-}" ]; then + rtl_fileop rm "${PKG_DESTDIR}" || return 1; + rtl_fileop mkdir "${PKG_DESTDIR}" || return 1; + fi; return 0; +}; + +# vim:filetype=sh |