obtained gcc-4.6.4.tar.bz2 from upstream website;upstream

verified gcc-4.6.4.tar.bz2.sig;
imported gcc-4.6.4 source tree from verified upstream tarball.

downloading a git-generated archive based on the 'upstream' tag
should provide you with a source tree that is binary identical
to the one extracted from the above tarball.

if you have obtained the source via the command 'git clone',
however, do note that line-endings of files in your working
directory might differ from line-endings of the respective
files in the upstream repository.

1 files changed, 285 insertions, 0 deletions

diff --git a/gcc/testsuite/ada/acats/tests/cxa/cxa8002.a b/gcc/testsuite/ada/acats/tests/cxa/cxa8002.a
new file mode 100644
index 000000000..8670e98ba
--- /dev/null
+++ b/gcc/testsuite/ada/acats/tests/cxa/cxa8002.a
@@ -0,0 +1,285 @@
+-- CXA8002.A
+--
+--                             Grant of Unlimited Rights
+--
+--     Under contracts F33600-87-D-0337, F33600-84-D-0280, MDA903-79-C-0687,
+--     F08630-91-C-0015, and DCA100-97-D-0025, the U.S. Government obtained 
+--     unlimited rights in the software and documentation contained herein.
+--     Unlimited rights are defined in DFAR 252.227-7013(a)(19).  By making 
+--     this public release, the Government intends to confer upon all 
+--     recipients unlimited rights  equal to those held by the Government.  
+--     These rights include rights to use, duplicate, release or disclose the 
+--     released technical data and computer software in whole or in part, in 
+--     any manner and for any purpose whatsoever, and to have or permit others 
+--     to do so.
+--
+--                                    DISCLAIMER
+--
+--     ALL MATERIALS OR INFORMATION HEREIN RELEASED, MADE AVAILABLE OR
+--     DISCLOSED ARE AS IS.  THE GOVERNMENT MAKES NO EXPRESS OR IMPLIED 
+--     WARRANTY AS TO ANY MATTER WHATSOEVER, INCLUDING THE CONDITIONS OF THE
+--     SOFTWARE, DOCUMENTATION OR OTHER INFORMATION RELEASED, MADE AVAILABLE 
+--     OR DISCLOSED, OR THE OWNERSHIP, MERCHANTABILITY, OR FITNESS FOR A
+--     PARTICULAR PURPOSE OF SAID MATERIAL.
+--*
+--
+-- OBJECTIVE:
+--      Check that resetting a file using mode Append_File allows for the 
+--      writing of elements to the file starting after the last element in
+--      the file.  
+--      Check that the result of function Name can be used on a subsequent
+--      reopen of the file.
+--      Check that a mode change occurs on reset of a file to/from mode 
+--      Append_File.
+--
+-- TEST DESCRIPTION:
+--      This test simulates the read/write of data from/to an individual 
+--      sequential file. New data can be appended to the end of the existing 
+--      file, and the same file can be reset to allow reading of data from 
+--      the file.  This process can occur multiple times.
+--      When the mode of the file is changed with a Reset, the current mode
+--      value assigned to the file is checked using the result of function
+--      Mode.  This, in conjunction with the read/write operations, verifies
+--      that a mode change has taken place on Reset.
+--      
+--      An expected common usage of the scenarios found in this test would
+--      be a case where a single data file is kept open continuously, being
+--      reset for read/append of data.  For systems that do not support a
+--      direct form of I/O, this would allow for efficient use of a sequential
+--      I/O file.
+--
+-- APPLICABILITY CRITERIA: 
+--      Applicable to all systems capable of supporting IO operations on 
+--      external Sequential_IO files.
+--
+--       
+-- CHANGE HISTORY:
+--      06 Dec 94   SAIC    ACVC 2.0
+--      19 Feb 97   PWB.CTA Fixed handling for file non-support and Reset
+--                          non-support.
+--!
+
+with Sequential_IO;
+with Report;
+
+procedure CXA8002 is
+   subtype Employee_Data is String (1 .. 11);
+   package Data_IO       is new Sequential_IO (Employee_Data); 
+
+   Employee_Data_File : Data_IO.File_Type;
+   Employee_Filename  : constant String := 
+     Report.Legal_File_Name (Nam => "CXA8002");
+
+   Incomplete         : exception;
+
+begin
+
+   Report.Test ("CXA8002", "Check that resetting a file using mode "  &
+                           "Append_File allows for the writing of "   &
+                           "elements to the file starting after the " &
+                           "last element in the file");  
+
+   Test_for_Sequential_IO_Support:
+   begin
+
+      -- An implementation that does not support Sequential_IO in a particular
+      -- environment will raise Use_Error or Name_Error on calls to various
+      -- Sequential_IO operations.  This block statement encloses a call to
+      -- Create, which should produce an exception in a non-supportive 
+      -- environment.  These exceptions will be handled to produce a
+      -- Not_Applicable result.
+
+      Data_IO.Create (File => Employee_Data_File,    -- Create file in 
+                      Mode => Data_IO.Append_File,   -- mode Append_File.
+                      Name => Employee_Filename);
+
+      --
+      -- The following portion of code demonstrates the fact that a sequential
+      -- file can be created in Append_File mode, and that data can be written
+      -- to the file.
+      --
+
+   exception
+      when Data_IO.Use_Error | Data_IO.Name_Error =>
+         Report.Not_Applicable
+            ( "Sequential files not supported - Create as Append_File");
+         raise Incomplete;
+   end Test_for_Sequential_IO_Support;
+      Operational_Test_Block:
+      declare
+         Blank_Data         : constant Employee_Data := "           ";
+         Employee_1         : constant Employee_Data := "123-45-6789";
+         Employee_2         :          Employee_Data := "987-65-4321";
+
+         -- Note: Artificial numerical data chosen above to prevent any
+         --       unintended similarity with persons alive or dead.
+
+         TC_Employee_Data   :          Employee_Data := Blank_Data;
+
+
+         function TC_Mode_Selection (Selector : Integer) 
+           return Data_IO.File_Mode is
+         begin
+            case Report.Ident_Int(Selector) is
+               when 1       => return Data_IO.In_File;
+               when 2       => return Data_IO.Out_File;
+               when others  => return Data_IO.Append_File;
+            end case;
+         end TC_Mode_Selection;
+
+         Employee_Filename : constant String :=       -- Use function Name to 
+           Data_IO.Name (File => Employee_Data_File); -- store filename in 
+                                                      -- string variable.
+      begin
+
+         Data_IO.Write (File => Employee_Data_File,   -- Write initial data 
+                        Item => Employee_1);          -- entry to file.
+
+         --
+         -- The following portion of code demonstrates that a sequential file
+         -- can be reset to various file modes, including Append_File mode, 
+         -- allowing data to be added to the end of the file.
+         --
+         begin
+           Data_IO.Reset (File => Employee_Data_File,   -- Reset file with 
+                          Mode => Data_IO.In_File);     -- mode In_File.
+         exception
+           when Data_IO.Use_Error =>
+              Report.Not_Applicable
+                ("Reset to In_File not supported for Sequential_IO");
+              raise Incomplete;
+           when others =>
+              Report.Failed 
+                ("Unexpected exception on Reset to In_File (Sequential_IO)");
+              raise Incomplete;
+         end;
+         if Data_IO."="(Data_IO.Mode (Employee_Data_File), 
+                        TC_Mode_Selection (1)) then   -- Compare In_File mode
+                                                      -- Reset successful, 
+            Data_IO.Read (File => Employee_Data_File, -- now verify file data.
+                          Item => TC_Employee_Data);
+      
+            if ((TC_Employee_Data (1 .. 7)  /= "123-45-") or
+                (TC_Employee_Data (5 .. 11) /= "45-6789")) then
+               Report.Failed ("Data read error");
+            end if;
+
+         else
+            Report.Failed ("File mode not changed by Reset");
+         end if;
+
+         --
+         -- Simulate appending data to a file that has previously been written 
+         -- to and read from.
+         --
+         begin
+           Data_IO.Reset (File => Employee_Data_File,   -- Reset file with 
+                          Mode => Data_IO.Append_File); -- mode Append_File.
+         exception
+           when Data_IO.Use_Error =>
+             Report.Not_Applicable
+               ("Reset to Append_File not supported for Sequential_IO");
+             raise Incomplete;
+           when others =>
+             Report.Failed 
+              ("Unexpected exception on Reset to Append_File (Sequential_IO)");
+              raise Incomplete;
+         end;
+
+         if Data_IO.Is_Open (Employee_Data_File) then -- File remains open
+                                                      -- following Reset to 
+                                                      -- Append_File mode?
+
+            if Data_IO."=" (Data_IO.Mode (Employee_Data_File), 
+                            TC_Mode_Selection (3)) then   -- Compare to
+                                                          -- Append_File mode.
+               Data_IO.Write (File => Employee_Data_File, -- Write additional
+                              Item => Employee_2);        -- data to file.
+            else
+               Report.Failed ("File mode not changed by Reset");
+            end if;
+
+         else
+            Report.Failed 
+              ("File status not Open following Reset to Append mode");
+         end if;
+
+         Data_IO.Close (Employee_Data_File);
+
+
+         Test_Verification_Block:
+         begin
+
+            Data_IO.Open (File => Employee_Data_File, -- Reopen file, using 
+                          Mode => Data_IO.In_File,    -- previous result of
+                          Name => Employee_Filename); -- function Name.
+
+            TC_Employee_Data := Blank_Data;           -- Clear record field.
+            Data_IO.Read (Employee_Data_File,         -- Read first record,
+                          TC_Employee_Data);          -- check ordering of 
+                                                      -- records.
+
+            if not ((TC_Employee_Data (1 .. 3)  = "123") and then
+                    (TC_Employee_Data (4 .. 11) = "-45-6789")) then
+               Report.Failed ("Data read error - first record");
+            end if;
+
+            TC_Employee_Data := Blank_Data;           -- Clear record field.
+            Data_IO.Read (Employee_Data_File,         -- Read second record,
+                          TC_Employee_Data);          -- check for ordering of 
+                                                      -- records.
+
+            if ((TC_Employee_Data (1 .. 6)  /= "987-65") or else
+                not (TC_Employee_Data (3 .. 11) = "7-65-4321")) then
+               Report.Failed ("Data read error - second record");
+            end if;
+
+            -- Check that only two items were written to the file.
+            if not Data_IO.End_Of_File(Employee_Data_File) then
+               Report.Failed("Incorrect number of records in file");
+            end if;
+
+         exception
+      
+            when Data_IO.End_Error =>             -- If two items not in 
+                                                  -- file (data overwritten),
+                                                  -- then fail.
+               Report.Failed ("Incorrect number of record elements in file");
+
+            when others => 
+               Report.Failed ("Error raised during data verification");
+
+         end Test_Verification_Block;
+
+      exception
+
+         when others => 
+            Report.Failed("Exception raised during Sequential_IO processing");
+
+      end Operational_Test_Block;
+
+      Final_Block:
+      begin
+        -- Check that file is open prior to deleting it.
+        if Data_IO.Is_Open(Employee_Data_File) then
+           Data_IO.Delete (Employee_Data_File);         
+        else
+           Data_IO.Open(Employee_Data_File, 
+                        Data_IO.In_File, 
+                        Employee_Filename);
+           Data_IO.Delete (Employee_Data_File);          
+        end if;
+      exception
+         when others =>
+            Report.Failed ("Sequential_IO Delete not properly supported");
+      end Final_Block;
+
+   Report.Result;
+
+exception
+  when Incomplete =>
+    Report.Result;
+  when others =>
+    Report.Failed ("Unexpected exception");
+    Report.Result;
+end CXA8002;